Analytical Services & Materials, Inc.

back to Coatings main page

Mask

(Use masking tape of painter)

Surface Preparation

(wash, degrease and then sand blast or scuff with abrasive disc)
 

Prime

(HVLP spray or brush)

Cure

(24 hrs, room temperature or 2 hrs at 230 deg. F  (110 deg. C))

 

Topcoat

(Airless Spray)

Cure at Room Temperature

(Minimum of 1 day for thin and 3 days for thick coating)
 

Demask and Use

Read in PDF format

 

Contact:   Dr. Bala, (757) 865-7093 ext 311    Email This email address is being protected from spambots. You need JavaScript enabled to view it.